English
English
| Quantity: | |
|---|---|
Product Features
On the basis of the general 1060 model, the worktable saddle has been strengthened. The three-axis guide rails all use 45mm heavy-duty roller guide rails. The wide guide rail span prevents the worktable from being suspended when the worktable is displaced. The Z-axis adopts a 6-slider design to greatly enhance the load-bearing rigidity! This model is a large-stroke and high-rigidity model, which can fully meet the needs of most steel parts processing!
About the features of FV-1160
The processing range is larger than the general one-meter model, and the rigidity of the machine tool is greatly enhanced. The spindle motor reaches a high-power motor of 11/15KW, the ultra-wide machine tool base and column, and the three-axis 45mm heavy-duty roller guide rail , X-axis and Z-axis use 6 sliders at the same time, which not only enhances the rigidity requirement of load-bearing, but also enables the machine tool to more effectively absorb the vibration during heavy cutting during processing. Thereby improving the accuracy and smoothness of the workpiece, so the 1160 model is the perfect combination of high speed and high rigidity!
TS27R detects tool length, tool diameter, and tool wear, and automatically inputs the measurements into the controller for compensation, making it easy to operate.
Install a spindle center water outlet system. The cutting fluid passes through the spindle center and is ejected from the tool tip. It can directly act on the workpiece and the cutting edge of the tool, taking away the cutting heat source. At the same time, the high-pressure cutting fluid can remove residues on the surface of the workpiece. Ensure processing quality, suitable for deep hole processing parts.
Product Parameters
| Model of CNC Machine | FV-850 | FV-855 | FV-1160 | FV-1370 | FV-1580 | ||
| Stroke | Unit | ||||||
| Stroke of X axis | mm | 800 | 800 | 1100 | 1300 | 1500 | |
| Stroke of Y axis | mm | 500 | 550 | 600 | 800 | 800 | |
| Stroke of Z axis | mm | 500 | 550 | 600 | 700 | 700 | |
| Distance from spindle nose to workbench surface | mm | 150-650 | 140-690 | 120-720 | 185-885 | 185-885 | |
| Workbench | |||||||
| Size(W×L) | mm | 1000x500 | 1000x500 | 1200x600 | 1400x800 | 1600x800 | |
| Max.load of workbench | kg | 400 | 600 | 800 | 1000 | 1200 | |
| Spindle | |||||||
| Taper | # | BT40 | BT40 | BT40 | BT50 | BT50 | |
| Spindle speed | rpm | 10000/12000 | 10000/12000 | 10000/12000 | 8000/6000 | 8000/6000 | |
| Casing aperture of spindle head | mm | Φ140mm | Φ150mm | Φ150mm | Φ155mm | Φ190mm | |
| Mode of power transmission | - | Belt/Direct connection | Belt/Direct connection | Belt/Direct connection | Belt/Gear | Belt/Gear | |
| Movement | |||||||
| 3-axis fast movement | m/min | 48/48/48 | 48/48/48 | 36/36/36 | 30/30/30 | 24/24/24 | |
| Cutting feeding | mm/min | 1-12000 | 1-12000 | 1-12000 | 1-8000 | 1-8000 | |
| Min.input unit | mm | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | |
| Magazine | |||||||
| Qty.of tools | Pcs | 24 | 24 | 24 | 24 | 24 | |
| Tool change mode | - | Tool arm type | Tool arm type | Tool arm type | Tool arm type | Tool arm type | |
| Tool switching time | sce | 1.8 | 1.8 | 1.8 | 5 | 5 | |
| Max.diameter of adjacent tool | mm | Φ80 | Φ80 | Φ80 | Φ125 | Φ125 | |
| Max.length of tool | mm | 300 | 300 | 300 | 350 | 350 | |
| Max.weight of tool | kg | 8 | 8 | 8 | 15 | 15 | |
| Motor | |||||||
| Spindle motor | KW | 7.5/11 | 7.5/11 | 11/15 | 15/18.5 | 18.5/22 | |
| Servo motor X/Y/Z | KW | 2.0/2.0/3.0 | 2.0/2.0/3.0 | 3.0/3.0/3.0 | 4.0/4.0/4.0 | 4.0/4.0/4.0 | |
| Oil cooler of spindle | W | 750 | 750 | 750 | 750 | 750 | |
| Automatic lubricating device | W | 35 | 35 | 35 | 35 | 35 | |
| Cutting fluid pump | W | 750 | 750 | 750 | 840 | 840 | |
| Precision | |||||||
| Positioning precision | mm | 0.007 (full stroke) | 0.007 (full stroke) | 0.007 (full stroke) | 0.010 (full stroke) | 0.012 (full stroke) | |
| Repetitive positioning precision | mm | 0.005 (full stroke) | 0.005 (full stroke) | 0.005 (full stroke) | 0.008 (full stroke) | 0.008 (full stroke) | |
| Others | |||||||
| Form of X/Y/Z guide rail | - | Linear roller guide | Linear roller guide | Linear roller guide | Linear roller guide | Linear roller guide | |
| Width of X/Y/Z axis | mm | 35/35/35 | 35/45/45 | 45/45/45 | 55/45/55 | 55/45/55 | |
| Capacity of cutting water tank | L | 250 | 250 | 200 | 400 | 400 | |
| Pressure demand of air source | Mpa | 6 | 6 | 6 | 6 | 6 | |
| Power capacity | KVA | 25 | 25 | 25 | 35 | 35 | |
| Weight(approximate) | kg | 4,600 | 5,800 | 7,500 | 9,000 | 12,000 | |
| Overall dimensions (L×W×H) | mm | 2,450×2,400× 2,650 | 2,700×2,450× 2,760 | 3,500×2,700 ×3,000 | 4,300×3,500 ×2,800 | 5,600×3,000 ×3,300 | |
Product Features
On the basis of the general 1060 model, the worktable saddle has been strengthened. The three-axis guide rails all use 45mm heavy-duty roller guide rails. The wide guide rail span prevents the worktable from being suspended when the worktable is displaced. The Z-axis adopts a 6-slider design to greatly enhance the load-bearing rigidity! This model is a large-stroke and high-rigidity model, which can fully meet the needs of most steel parts processing!
About the features of FV-1160
The processing range is larger than the general one-meter model, and the rigidity of the machine tool is greatly enhanced. The spindle motor reaches a high-power motor of 11/15KW, the ultra-wide machine tool base and column, and the three-axis 45mm heavy-duty roller guide rail , X-axis and Z-axis use 6 sliders at the same time, which not only enhances the rigidity requirement of load-bearing, but also enables the machine tool to more effectively absorb the vibration during heavy cutting during processing. Thereby improving the accuracy and smoothness of the workpiece, so the 1160 model is the perfect combination of high speed and high rigidity!
TS27R detects tool length, tool diameter, and tool wear, and automatically inputs the measurements into the controller for compensation, making it easy to operate.
Install a spindle center water outlet system. The cutting fluid passes through the spindle center and is ejected from the tool tip. It can directly act on the workpiece and the cutting edge of the tool, taking away the cutting heat source. At the same time, the high-pressure cutting fluid can remove residues on the surface of the workpiece. Ensure processing quality, suitable for deep hole processing parts.
Product Parameters
| Model of CNC Machine | FV-850 | FV-855 | FV-1160 | FV-1370 | FV-1580 | ||
| Stroke | Unit | ||||||
| Stroke of X axis | mm | 800 | 800 | 1100 | 1300 | 1500 | |
| Stroke of Y axis | mm | 500 | 550 | 600 | 800 | 800 | |
| Stroke of Z axis | mm | 500 | 550 | 600 | 700 | 700 | |
| Distance from spindle nose to workbench surface | mm | 150-650 | 140-690 | 120-720 | 185-885 | 185-885 | |
| Workbench | |||||||
| Size(W×L) | mm | 1000x500 | 1000x500 | 1200x600 | 1400x800 | 1600x800 | |
| Max.load of workbench | kg | 400 | 600 | 800 | 1000 | 1200 | |
| Spindle | |||||||
| Taper | # | BT40 | BT40 | BT40 | BT50 | BT50 | |
| Spindle speed | rpm | 10000/12000 | 10000/12000 | 10000/12000 | 8000/6000 | 8000/6000 | |
| Casing aperture of spindle head | mm | Φ140mm | Φ150mm | Φ150mm | Φ155mm | Φ190mm | |
| Mode of power transmission | - | Belt/Direct connection | Belt/Direct connection | Belt/Direct connection | Belt/Gear | Belt/Gear | |
| Movement | |||||||
| 3-axis fast movement | m/min | 48/48/48 | 48/48/48 | 36/36/36 | 30/30/30 | 24/24/24 | |
| Cutting feeding | mm/min | 1-12000 | 1-12000 | 1-12000 | 1-8000 | 1-8000 | |
| Min.input unit | mm | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | |
| Magazine | |||||||
| Qty.of tools | Pcs | 24 | 24 | 24 | 24 | 24 | |
| Tool change mode | - | Tool arm type | Tool arm type | Tool arm type | Tool arm type | Tool arm type | |
| Tool switching time | sce | 1.8 | 1.8 | 1.8 | 5 | 5 | |
| Max.diameter of adjacent tool | mm | Φ80 | Φ80 | Φ80 | Φ125 | Φ125 | |
| Max.length of tool | mm | 300 | 300 | 300 | 350 | 350 | |
| Max.weight of tool | kg | 8 | 8 | 8 | 15 | 15 | |
| Motor | |||||||
| Spindle motor | KW | 7.5/11 | 7.5/11 | 11/15 | 15/18.5 | 18.5/22 | |
| Servo motor X/Y/Z | KW | 2.0/2.0/3.0 | 2.0/2.0/3.0 | 3.0/3.0/3.0 | 4.0/4.0/4.0 | 4.0/4.0/4.0 | |
| Oil cooler of spindle | W | 750 | 750 | 750 | 750 | 750 | |
| Automatic lubricating device | W | 35 | 35 | 35 | 35 | 35 | |
| Cutting fluid pump | W | 750 | 750 | 750 | 840 | 840 | |
| Precision | |||||||
| Positioning precision | mm | 0.007 (full stroke) | 0.007 (full stroke) | 0.007 (full stroke) | 0.010 (full stroke) | 0.012 (full stroke) | |
| Repetitive positioning precision | mm | 0.005 (full stroke) | 0.005 (full stroke) | 0.005 (full stroke) | 0.008 (full stroke) | 0.008 (full stroke) | |
| Others | |||||||
| Form of X/Y/Z guide rail | - | Linear roller guide | Linear roller guide | Linear roller guide | Linear roller guide | Linear roller guide | |
| Width of X/Y/Z axis | mm | 35/35/35 | 35/45/45 | 45/45/45 | 55/45/55 | 55/45/55 | |
| Capacity of cutting water tank | L | 250 | 250 | 200 | 400 | 400 | |
| Pressure demand of air source | Mpa | 6 | 6 | 6 | 6 | 6 | |
| Power capacity | KVA | 25 | 25 | 25 | 35 | 35 | |
| Weight(approximate) | kg | 4,600 | 5,800 | 7,500 | 9,000 | 12,000 | |
| Overall dimensions (L×W×H) | mm | 2,450×2,400× 2,650 | 2,700×2,450× 2,760 | 3,500×2,700 ×3,000 | 4,300×3,500 ×2,800 | 5,600×3,000 ×3,300 | |
